Sign inStart free trial

Defining and managing zones

Zones mark areas of your facility floor, such as no-go areas and charging docks. Robsy alerts you when a robot reports a position inside a no-go zone.

Steps

  1. Open your facility's Floors tab and set up each floor: a name, its width and height in metres, and, if you have one, a PNG or JPEG plan.
  2. Open Zones, choose New zone, pick the floor and draw a rectangle. Tick Restricted (no-go) for an area robots must stay out of.
  3. Have each robot send its floor_number and its location in facility metres; Robsy draws it on the map and alerts you when it reports a position inside a no-go zone.