Mark an obstacle on the floor map

Steps

1. Open the facility map, pick the floor and choose Mark obstacle. Drag a rectangle over the floor, or enter its position and size in metres.
2. Name it and choose how long it stays: until someone clears it, or until a time you set.
3. Robsy alerts you when a robot reports a position inside it: at that report, or usually within a minute for a robot already inside. It is an alert only: Robsy does not stop or reroute the robot.
4. A robot is checked only when it reports its floor and its position in facility metres, and a robot silent for 5 minutes is not judged. Open the obstacle and choose Mark cleared when the hazard is gone.